|
REASON
|
ELIMINATION METHOD
|
|
The starter does not rotate after inclusion of ignition
|
| The rechargeable battery is discharged | To charge the rechargeable battery. |
| The break in a wire 50 to the ignition switch lock, is damaged an ignition switch wire | To eliminate break, to replace the damaged parts. |
| Break of a wire or conclusion of weight. The rechargeable battery is discharged | To check a wire and a conclusion of the rechargeable battery. To measure tension of the rechargeable battery, if necessary, to charge the rechargeable battery. |
| Insufficient receipt of current because of the free or oxidized connections | To clear poles and plugs of the rechargeable battery. To provide necessary connection between the rechargeable battery, a starter and weight. |
| Lack of tension on a conclusion 50 (the traction relay) | The break in a wire, is damaged the ignition switch. |
|
The starter works too slowly and does not rotate the engine
|
| The rechargeable battery is discharged | To charge the rechargeable battery. |
| The engine is not filled with winter or all-weather oil | To fill all-weather oil. |
| Insufficient current because of the free or oxidized tips of wires | To smooth out polar conclusions of rechargeable batteries, a starter and tips of wires, to delay connections. |
| Brushes do not contact to a collector, are got jammed in the mandrels, are worn-out, greasy or polluted | To check brushes, to clear or replace. To check the brush holder. |
| Inadequate gap between brushes and a collector | To replace brushes and to clear the brush holder. |
| On a collector deposit, risks, pollution | Переточитть or to replace with the collector an anchor. |
| Lack of tension on a conclusion 50 (at least 8B) | To check switching of the switch of ignition or the traction relay. |
| Bearings are beaten out | To check bearings, if necessary to replace. |
| The traction relay is damaged | To replace the traction relay. |
|
The starter is hooked and begins to work, but the engine does not rotate or rotates breakthroughs
|
| The gear mechanism (the drive gear wheel mechanism) is damaged | To replace the gear mechanism. |
| The drive gear wheel is polluted | To clear a gear wheel. |
| The gear wreath on a flywheel is damaged | To repair a gear wreath, if necessary to replace a flywheel. |
|
The gear mechanism is not separated
|
| The gear mechanism or screw vents are polluted or damaged | To clear or replace the gear mechanism. |
| The traction relay is damaged | To replace the traction relay. |
| The returnable spring burst or weakened | To replace a returnable spring. |
